Charlotte Concrete Patios

Reducing Concrete Stamping Cost

Posted on: March 21st, 2018 by

Concrete stamping has been known to be one of the best ways one can use to decorate their concrete structures. However, the concrete stamping cost can vary from one design to another. There are different designs and colors one can use for concrete stamping. They can range from a few hundred dollars to thousands of dollars.

There are very many factors that will contribute to the concrete stamping cost. Some of the factors are the ones that are listed below. Weather should be something that you should be keen on. This is because rain can ruin the concrete stamping process that you are undertaking. Be sure to have a rough idea of the weather for the days to come.

Cement should be used on a minimum of five sacks. Use of less cement will lead to poorly stamped concrete. The job may then have to be redone to improve its outlook. The redoing will mean greater expenses than normal.

When using liquid color to design concrete stamping that you want, us the normal finishing procedures. This will reduce the overall concrete stamping cost. If you will happen to use hardener, use a tamper or screed to finish of normally. If you do not have such tools, you can implement the use of a magnesium float to help you finish. Use of a steel trowel should be implemented such that it can be finished perfectly. Unfortunately some people have been known to use the steel trowel before they apply the final color hardener. This is not advisable as it might lead you to repeat the whole concrete stamping process. Make sure that when you are applying hardener that there will be no possibility of water on the surface that you are using. Generally, 100 lbs. per 100 square feet for lighter colors would be required for coverage.

When you are floating or toweling, do not over do it. Over floating or toweling will make water to rise to the surface. When this happens you will find that once the water has risen to the surface, it reduces color density. At the same time remember not to fog or sprinkle water on the surface. Color hardeners that are bought will have lumps due to the settlement that occurs on the hardener when it is being shipped. To get rid of these clumps, fluff the hardener by using your hands. This is the same case with the release agents as they also settle. If these procedures are followed keenly, you should be able to reduce the overall concrete stamping cost.

If you are not going to do the job yourself, make sure that you hire professionals who have experience in this line of work. They will be able to tell you where to buy the necessary materials at competitive market prices. They will also be able to guide you on what amount of items such as hardeners or paints so that you do not purchase materials that will not be needed. You will find that the concrete stamping cost can be able to be reduced significantly with proper planning and use of the above mentioned steps.

Ken Hermanto is the publisher of Concrete Stamping website. This website offers knowledge on DIY Concrete Stamping.

Leave a Reply